DUBLIN–(BUSINESS WIRE)–The “Automotive Engine Cooling Systems Market and Trend Analysis by Technology, Key Companies and Forecast, 2021-2036” report has been added to ResearchAndMarkets.com’s offering.
The report provides comprehensive on Engine Cooling Systems, market trends, shares and forecasts as well as a technical round-up of various technologies and brief company profiles. Report’s manufacturer market share estimates cover Global (Engine Cooling Systems; and Radiators), Europe (Engine Cooling), North America (Engine Cooling) and Asia-Pacific (Engine Cooling).
Thermal energy flows are an important part of a vehicle’s energy balance. Even in the most advanced diesel engines, the vehicle drive uses barely one-third of the fuel energy. The task of engine cooling is to draw waste heat out of the engine in order to allow the engine to operate efficiently.
The key trends engine cooling manufacturers face are turbocharging and exhaust gas recirculation. The combination of the two will enable compliance with stricter emissions standards while offering minimum fuel consumption.
Although hybrids have not really created a substantial change in the heat transfer philosophy of the engine, it is key to know if this technology has created the need for additional product on the electronic side of the system.
Yes, there are additional cooling requirements for battery cooling and power electronics/converter cooling. Li-Ion batteries have an upper temperature limit of around 40o C. High temperatures reduce the lifetime of the battery. Under warm climate conditions the Li-Ion battery therefore has to be cooled with the aid of the air conditioning system. Converter cooling requires a coolant temperature of around 60o C. Therefore, so called low-temperature radiators are required in addition to the normal power train radiator.
A typical cooling system consists of an Engine Water Jacket, Thermostat, Water Pump, Radiator, Cooling Fan, Hoses, Heater Core, Oil Cooler and Overflow, or Expansion Tank. Forecasts cover OE Radiators fitted to newly-assembled passenger cars and light vehicles across 14 markets. There are two basic radiator assembly variants: Brazed Radiators, and Mechanically Jointed or Assembled Radiators.
- Automotive OE Engine Radiators Fitment and market size data for the top 14 markets.
- A review of the latest engine cooling technological developments and market trends (including developments in Charge Air Coolers, Heat Exchangers, Alternative Powertrain, Hybrid Vehicle Solutions, Car Radiators, Car Cooling Fans).
- Regional supplier market share data tables and commentary.
- Exclusive interviews with OE suppliers including Delphi, Hyperdrive Innovation, Visteon.
- Updated profiles of the major Automotive Engine Cooling suppliers including their strategies and prospects.
Key Topics Covered:
1. PESTER Analysis
- Continental AG
- Delphi Automotive LLP
- Denso Corporation
- Hanon Systems
- Schaeffler Group (INA-Holding Schaeffler KG)
- Valeo SA
- Webasto AG
- Emerging markets
- Market shares
- Defining the elements
- Drivers of change
- Packaging solutions
- Behr cuts tank-header overhang on Audi A5
- Behr develops EGR control module for diesels
- Conti-Tech Fluid Automotive develops products for fuel-cell power vehicles
- Delphi’s liquid cooled charge air coolers
- Denso creates refrigeration cycle system for cars that uses an ejector
- Denso’s plant-derived resin radiator tank
- Visco coupling from Hella Behr Service
For more information about this report visit https://www.researchandmarkets.com/r/bwa7r5